Uninterruptible power supply, operating principle: network-interactive VI. Output 2000 VA/1600 W, sine wave output voltage in mains and battery operation, maintenance-free lead battery, RS232 and USB interface, data cable and management/shutdown software included, slot for SNMP adapter CS141SYMINI. Dimensions (HxWxD): 210x140x380 mm, weight 17.5 kg.
The UPS system generates a high voltage that can be dangerous if unauthorized repairs are attempted. Repairs may only be carried out by trained and instructed personnel. • The UPS system contains a battery energy source. The sockets of the uninterruptible power supply (UPS) can be live even if the UPS system is not connected to the mains. • Prevent water and other objects from entering the UPS system and the sockets. • Connect the UPS system directly to a grounded two-pole Schuko socket. • The mains connection of the UPS system must be easily accessible so that the UPS system and the mains can be disconnected quickly. • In the event of danger, switch off the UPS system and pull the power plug of the UPS supply cable out of the socket. • Important: This UPS system is not suitable for supplying inductances (electric motors or transformers). Do not connect a laser printer or plotter to the UPS. These consume more power during operation than the UPS can supply. The UPS system then goes into overload and switches off. • Do not throw the battery into a fire - the battery can explode. Do not open the battery - released battery acid can cause chemical burns to the face and eyes.