ERREPI NetPower 2000 R

The line-interactive uninterruptible power supply provides a stable power supply for demanding systems with an output of 2000 VA or 1800 watts. The integrated VI operating principle ensures efficient regulation of voltage fluctuations in the power grid. A key feature is a pure sine-wave output in both mains operation and battery operation, which supports the safe operation of modern devices with sensitive power supplies. In the event of a need, maintenance-free lead-acid batteries integrated into the housing provide the power supply. Thanks to the flexible design, the system can optionally be used as a vertical floor-standing unit or as a flat slide-in unit in a standardized 19-inch rack with two rack units. The package includes a USB interface, the required data cable, and functional management and shutdown software for controlled system operation. For more advanced requirements, the system can optionally be equipped with an SNMP adapter, dry contacts, or an external battery extension to increase autonomy time. The device measures 438 millimeters in width and 510 millimeters in depth at two rack units and weighs 21.5 kilograms.

Safety information

Always observe basic safety regulations when installing and using the UPS system. Since life-threatening voltage levels exist within the system, the IP20-rated enclosure must only be opened by qualified service personnel. Ensure that the system is properly grounded and operated within a compatible TN, IT, or TT power system. Before proceeding, verify that the specifications on the nameplate match your power grid and the total power consumption of the connected equipment. To prevent fire hazards, the unit must only be connected to a circuit protected by an easily accessible circuit breaker (rated 20A, trip curve C). For hardwired systems, an external disconnect switch is required, whereas for pluggable units, the power outlet must be located in the immediate vicinity and be easily accessible. Always follow all connection and operating instructions in the manual in the exact order specified. Select the installation site for the UPS carefully. The system must never be installed near liquids, in excessively humid environments, in direct sunlight, or near heat sources. Ensure that no foreign objects enter the unit and that the ventilation grilles remain unobstructed to allow for adequate cooling. If temporary storage is required, it must take place in a dry location. Permissible storage temperatures range from -25°C to +55°C without batteries and from 0°C to +40°C with batteries; however, temperatures below 25°C are recommended for optimal battery life. Exercise particular caution when handling the installed batteries, as they contain small amounts of toxic substances and pose a risk of electric shock and high short-circuit currents. Maintenance must only be performed or supervised by personnel familiar with the necessary safety precautions. When replacing batteries, the exact same type and number of batteries must be used, as using incorrect models poses a risk of explosion. Under no circumstances may batteries be disposed of in a fire, opened, or mechanically destroyed. The electrolyte released in such cases is toxic and can cause severe chemical burns to the skin and eyes. Always dispose of used batteries properly and in accordance with applicable legal regulations.

Disposal information

This product and the batteries contained within it are subject to strict European and national environmental regulations; under no circumstances should they be disposed of with ordinary household waste at the end of their service life. The crossed-out wheeled bin symbol on the device indicates that the UPS unit must be collected separately from unsorted municipal waste. Please take the discarded device to an official municipal collection point—such as a recycling center—or return it to an electronics retailer or the manufacturer for proper recycling. Remember to reset any network-enabled management cards to factory settings beforehand to erase any stored network configurations. The lead-acid batteries installed in the UPS require special attention, as they contain toxic heavy metals and corrosive acids that can cause serious environmental damage if disposed of improperly. If possible, remove the batteries from the unit before disposal and place them in a separate battery collection stream. Used industrial batteries can be returned free of charge to the manufacturer, the distributor, or specialized take-back systems. To prevent short circuits and associated risks of fire or explosion, be sure to tape over exposed battery terminals with insulating tape before transport. Packaging materials should also be recycled properly for the sake of the environment: dispose of cardboard and paper in the paper recycling bin, while plastic film, Styrofoam, and plastic strapping belong in the appropriate recycling collection (such as the "Yellow Bag" or "Yellow Bin" systems).